Changelog:
* Fix OpenWRT with existing forwarder + fix dnsmasq restore issue
* Refactor service execution to better report errors
* Refactor merlin tz setup so it does not need to curl on boot
* Improve upgrade command for install.sh
* Do not mask curl error on install
* Fix timezone logging issue with Merlin
* Add support for Merlin John's fork
* Add raspbian support to installer
* Fix upgrade not reinstalling service
* Limit the aarch64 fix to merlin
* Reset DHCP DNS to self on Merlin router setup
* Fix memory issue with aarch64 based router
* Update Go version
* Allow override of detected env
* Setup timezone correctly on Merlin init script
* Don't ignore curl error on install
* Fix Asus Merlin John’s fork trust store issue
* Fix synology auto setup
* Fix report client info not enabled with setup-router option
* Add support for edgeos DHCP lease file locations
* Fix signal handling when running as a service
* Fix exit menu keyboard shortcut
* Do not fail on upgrade if uninstall failed
* Fix exit menu in installer
* Remove failing upx (for now)
* Make sure nextdns keeps running once ssh session is closed
* Add auto setup of Synology with DHCP server enabled
* Use router's DNS to discover more names
* Get A/AAAA from both answer and addition sections
* Ignore certain invalid names during discovery
* Fix activate with setup-router
* Fix serveral install issues
* Add exponential backoff to mdns probe retry
* Correctly end dhcp lease probing when discovery is cancelled
* Store DHCP/MDNS discovered addrs separately to avoid ping/pong
discovery
* Add DHCP lease support to client discovery
* Do not report mdns listen unreachable error as start will retry
* Reimplement mdns client discovery
* Fix installer GOARCH detection with arm6+
* Fix bin install on platforms needing sudo
* Correctly detect edgeos and ddwrt as routers
* Fix install.sh sudo
* Disable upx as it break many platforms
* Fix installer regression with merlin
* Fix mips64 detection
* Fix OpenWRT detection
* Fix UPX post build script
* Fix install with John's Asuswrt-Merlin fork
* Fix more DDWRT
* Fix DDWRT support
* Fix merlin service add/remove
* Use UPX to compress binaries typicially used on routers
* Revert "Remove direct dep on reflect"
* Use letters for installer menus
* Fix install script for upgrades not working if binary is running
* Do not return an error on mdns listen if at least one interface worked
* Fix installer for synology
* Fix pfSense support
* Remove the logs for each server on each connect
* Move install instructions to wiki
* Fix install.sh uid detection with merlin
* Fix install.sh for arm6+
* Add Synology init system support
* Fix install.sh
* Add a generic router setup that just changes the listen to public
* Update README
* Add auto setup support for EdgeOS
* Restore per OS install instruction in readme during installer beta
* Refactor install.sh
* Remove dep on golang.org/x/net/ipv[4|6]
* Remove direct dep on reflect
* Rewrite the zeroconf code to use dnsmessage instead miekg/dns
* Add auto setup support for DD-WRT
* Improve arch detection
* Add auto setup support for OpenWRT
* Add automatic router setup support
* Fix service
* Remove dep en seq on sysv style init scripts
* Add Entware init system support
* Report init system used on install and in UA
* Add EdgeOS support
* Reads /etc/hosts before forwarding queries to the upstream
* Fix localhost resolution with Linux arch empty /etc/hosts
* Use /etc/hosts file to resolve listen address and list on all IPs
listed
* Add support for multiple router firmware
* Fix hardened privacy disabling dual stack
* Add a config set sub command and refactor commands handling
* Add support for activate on freebsd
* Fix inverted MAC matching
* Add unit test for conf prefix match #35
* Activate uses listen address instead of static 127.0.0.1
* Improve FreeBSD integration
* Add FreeBSD support
* Fix a typo
* Use zip for windows archive
Signed-off-by: Olivier Poitrey <rs@nextdns.io>
Edited PKG_RELEASE to 1
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
(cherry picked from commit a3b028b357)
Currently luci is broken in 19.07.
Changes done to fix this problem didn't merge in the
19.07 release.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* rename smbd->ksmbd (upstream name change)
* ksmbd-tools: build with static glib2 (usmbd = ~90kb, smbuseradd = ~40kb)
* new etc folder location = /etc/ksmbd/smb.conf
* new database name = /etc/ksmbd/ksmbdpwd.db
* fixes "map to guest = Bad User" while userdb is also used
* fixes missing ipv6 support
* update/rename to "luci-app-ksmbd"
* remove UCI samba compatibility code for section names (ksmbd uses [share] + [globals] not [sambashare] + [global])
* ksmbd: release 3.1.1 version
* ksmbd: does not work if ipv6 module is not loaded or compiled in
* ksmbd: capsule ifdef CONFIG_SMB_INSECURE_SERVER with smb1 codes
* ksmbd: release 3.1.0 version
* ksmbd: fix over 80 character warnings
* ksmbd: rename smbd-tools to ksmbd-tools in travis.yml
* ksmbd: fix password db file location in travis.yml
* ksmbd: rename smbd prefix function to ksmbd
* ksmbd: rename smbd prefix source files to ksmbd
* Revert "smbd: set connection status with SMBD_SESS_EXITING instead of direct destory"
* ksmbd: rename smbd to ksmbd in .travis.yml
* smbd: rename module name to ksmbd.ko
* smbd: set connection status with SMBD_SESS_EXITING instead of direct destory
* smbd: previous session with same user and same password should be deleted
* smbd: only use global session table in smb2 session
* smbd: add support for ipv6
* smbd: fix empty macro issue from smbd_debug
* cifsd: fix printing of file names in find_next
Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com>
This allows custom config parameters to be added to the generated config
files, enabling the original intended functionality per
https://openwrt.org/docs/guide-user/services/ups/software.nut.
Example usage from /etc/config/nut_server:
config driver 'apc'
option driver 'snmp-ups'
option snmp_version 'v3'
option port '172.16.100.5'
list other 'secLevel'
list other 'secName'
list other 'authPassword'
list otherflag 'notransferoids'
config other 'other_secLevel'
option value 'authNoPriv'
config other 'other_secName'
option value 'some_username'
config other 'other_authPassword'
option value 'some_password'
config other 'otherflag_notransferoids'
option value '1'
Signed-off-by: Matt Merhar <mattmerhar@protonmail.com>
(cherry-picked from 0b04dd34a0)
Replaces OpenWrt patch with upstream patch. Also removes
0002-Fix-check-for-empty-string.patch as this is included in upstream
OpenSSL 1.1.0 patch.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
(cherry-picked from 7d4f1b8589)
This commit makes
- the libgd dependency (as well as specifying libs and includes)
- the configure argument "--with-cgi"
dependant on whether the package nut-web-cgi is selected.
nut-web-cgi is also added to PKG_CONFIG_DEPENDS.
Resolves: #10641
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
(cherry-picked from cdd660a41d)
Fixes:
when using HTTP/2 a client might cause excessive memory
consumption and CPU usage (CVE-2019-9511, CVE-2019-9513,
CVE-2019-9516).
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
(cherry picked from commit 5ffc744018)
Note:
In some cases when tor daemon starts before
than the router is connected to the Internet.
Tor will exit and you have to run it manually.
This should fix this case.
Signed-off-by: Jan Pavlinec <jan.pavlinec@nic.cz>
(cherry picked from commit 5bce9c3e1d)
PKG_RELEASE not bumped because this only affects package description.
We document that passlib and bcrypt are needed if one wishes to use
bcrypt encryption of passwords. These have not been added as dependencies
as Radicale2 can have a frontend webserver authenticate users rather than
radicale itself.
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
Makefile always checks the existence of host's NAT-PMP header,
which results in internal NAT-PMP code being used if it's missing.
Add a patch to make it check targets' header instead.
Use aligned_alloc() instead of valloc() in case of uclibc.
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
Olivier Poitrey