Update collectd to version 5.12.0.
* Refresh patches
* Remove upstreamed patch 920-fix-ubi-data-source-type.patch
* Backport a patch from upstream to fix a missing define
(920-backport-netlink-reg-noerror.patch)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
(cherry picked from commit 28747825df)
Currently the init script generates a config file from uci, that has the
include line before the interval line. This means, that anything happening
in the include directory does not yet see the changed Interval.
Moving the include line before the uci generation process fix this issue.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
(cherry picked from commit 50f56c2ede)
Currently the values are stored in the ubi plugin as data source type
`counter`. But this makes no sense, because the values change very slowly
and I don't want to know the rate of change. It is better to store the
value as data source type `gauge`. Then I can see the current value.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
(cherry picked from commit e7054e7e79)
Increase the range of characters that get substituted by '_' so the
shell doesn't complain about illegal variable names.
Primarily done to catch '.' and '-' but who knows what funnies will
appear in i/f names.
It's a shame that busybox ash doesn't understand :alnum:
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
(cherry picked from commit c8640d1f68)
Add a script that can collect data from mq (multi queue) and cake
qdiscs.
Script is reliant on collectd's 'exec' module.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
(cherry picked from commit 38235de9c3)
Explicitly disable the new dpdk_telemetry module to fix
compilation in buildbot.
(other dpdk modules are aleady disabled)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
(cherry picked from commit b936fc4e0d)
Update collectd to 5.10.0
* leave new plugins as disabled for now (procevent, sysevent)
* refresh patches. Remove unenecessary version fix
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
(cherry-picked for 19.07. PKG_RELEASE=2 as cpufreq was already backported)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Adjust the reaction to a polling interval timestamp that references
to a past time.
Past timestamps can happen when ntpd adjusts router's time after network
connectivity is obtained after boot. Collectd shows warnings for each plugin
as it tries to enter new values with the same timestamp as the previous one.
This patch adjusts the next polling time to be now+2 seconds for the main
loop and for the plugin-specific read loops. That avoids the warnings, but
does not overreact in case there are shorter polling intervals or the time
gets adjusted for other reasons.
Additionally some debug statements are aded, but they are visible only
when --enable-debug configure option is used in Makefile.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
(cherry-picked for 19.07)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Collectd without log type plugin loaded will write log lines to stderr.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
(cherry-picked for 19.07)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
The only action the Threshold plugin takes itself is to generate and
dispatch a notification. Other plugins can register to receive
notifications and perform appropriate further actions.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
(cherry-picked for 19.07, line numbers adjusted)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Redmine-patch-id: 3680
If I build an image with the imagebuilder I get the following output
during image building:
../root-x86/etc/init.d/collectd: line 4: /usr/share/libubox/jshn.sh:
No such file or directory
To remove this messsage move include to the needed postion, so that the
message does not occur during image building on the host system anymore.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
(cherry-picked, modified to match 19.07)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
As some ipq40xx CPUs support frequency scaling, enable building
collectd-mod-cpufreq for ipq40xx (for private builds) and
its package architecture brcm2708_bcm2709 (for buildbot)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
(cherry picked from commit 5e0d5c9c7f)
Upstream project's behaviour of reporting this data source in range 0-1
is used by at least CentOS 7 collectd 5.8.1, very likely the same
behaviour is also in widely use by other distributions.
The change is important for providing consistent experience across
collectd deployments on different environments
Ref: https://github.com/collectd/collectd/pull/3244
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
(cherry picked from commit 2f66fa5c23)
Ref: https://github.com/openwrt/luci/issues/3308
This allows collectd to get data of Mikrotik devices in a improved way than via SNMP.
closes#10327
Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
cherry-pick does not apply cleanly changed PKG_RELEASE number.
(cherry picked from commit 4261f45734)
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Update collectd to version 5.9.0
* remove backported upstream patches (sensors, modbus)
* remove lua patch that has been been implemented upstream
(See collectd PR 3144)
* refresh patches and accommodate into upstream path changes
* place the 'stations' datatype for iwinfo in alpbetically
correct place in types.db
* add libmnl dependency to 'processes' plugin required for the
new Linux process Delay Accounting capability.
(Alternatively the capability & requirement might be patched away
in Makefile.am, HAVE_LIBTASKSTATS from collectd_4ea7a572)
* new plugins (disabled): ampq1, gpu_nvidia, pcie_errors,
write_stackdriver, write_syslog
compile-tested: ar71xx/WNDR3700 (all plugins)
run-tested: ar71xx/WNDR3700 (selected plugins)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
(cherry picked from commit 08d759f14a)
If you want to register more than one lua plugin, you cannot start the
collectd.
You get always the error message:
"The read function "lua/(null)" is already registered. Check for
duplicates in your configuration!"
This is not what I expect and what the documenation says.
With this change it is now possible to registrate more then one lua
Script.
See https://github.com/collectd/collectd/pull/2379
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* 938897a2 Add scale and shift to modbus plugin
* 60280b80 correcting all the wrongs
* a00ab529 Add support for RS485 to modbus plugin
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Backport an upstream patch to remove the upper limit of
lm-sensors version check, so that using lm-sensors 3.5.0
will work.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
The ethstat plugin for collectd provides a convenient way to track a large list
of variables associated with network interfaces such as channel busy time and
many others.
A list of the available variables for a given interface may be acquired by
running ethtool -S <interface>
Signed-off-by: Petko Bordjukov <bordjukov@gmail.com>
