The previous implementation always succeeded so no scan was performed.
This now fixes that and it correctly scans for BTRFS devices if BTRFS
support is in kernel.
Signed-off-by: Karel Kočí <karel.koci@nic.cz>
Now that libaio compiles on arc targets we need to add the dependency to
libaio on these targets as well.
resolves#9298
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Added support for reload_config
This service does not need to start so early (even
before the netwrok is up). Start it after
the device is mostly up and operational.
Compile-tested on: ipq806x
Runtime-tested on: ipq806x
Signed-off-by: Marc Benoit <marcb62185@gmail.com>
(cherry picked from commit b6078559cd)
Added the ability to change sampling interval
and provide a list of IRQ's to ignore
via /etc/config/irqbalance
Signed-off-by: Marc Benoit <marcb62185@gmail.com>
(cherry picked from commit b7a99b2334)
Upgraded from 1.2.0 to 1.6.0 to pick up
all the latest fixes and improvements
irqbalance made glib2 mandatory since 1.3.0, but is
using very little of it. glib2 linked statically
to minimize the impact.
1.2.0 size: 33,619
1.6.0 size: 99,539
~# irqbalance --version
irqbalance version 1.6.0
~# ldd /usr/sbin/irqbalance
/lib/ld-musl-armhf.so.1 (0xb6f5f000)
libgcc_s.so.1 => /lib/libgcc_s.so.1 (0xb6f43000)
libc.so => /lib/ld-musl-armhf.so.1 (0xb6f5f000)
~# opkg info irqbalance
Package: irqbalance
Version: 1.6.0-6
Depends: libc
Status: install user installed
Architecture: arm_cortex-a7_neon-vfpv4
Installed-Time: 1582839249
Compile-tested: ipq806x/R7800 & ipq40xx/GL-B1300
Run-tested: ipq806x/R7800 & ipq40xx/GL-B1300
Signed-off-by: Marc Benoit <marcb62185@gmail.com>
(cherry picked from commit bdcb872a40)
Added the ability to enable/disable via a config file;
the default is enabled for backwards compatibility.
This is an additional service, so running it the
same priority as dnsmasq, etc does not make sense.
Added USE_PROCD=1
"done" starts at "START=95", so this should start earlier
Added STOP=10 to stop syncthing early
Compile-tested on: ipq806x, ipq40xx
Runtime-tested on: ipq806x, ipq40xx
Signed-off-by: Marc Benoit <marcb62185@gmail.com>
(cherry picked from commit 6f6877460a)
zip has 12 year old source code that would require work to make
the binary actually work.
> root@router1:/# zip
> zip error: Not supported (uzoff_t not same size as zoff_t)
As the binary does not work, lets remove the package to
avoid confusion for the end-users.
Reference to #10985 and #11089 as well as
https://github.com/openwrt/openwrt/commit/ad8c2d6099a7da5192ee6e2c52a8303642271
Adapted from: c1201a999b
(note: The package was renamed in master from zip to infozip
a few weeks ago due to buildbot's relutance to compile zip in
master and 19.07 ever since host zip was added as a build tool.)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Fixed license information.
Removed patch requiring autoreconf and replaced with a configure variable.
Removed faulty patch that broke systems without a disabled crypt size hack.
Replaced with using a SED command as well as bcrypt, which works in musl.
Removed su patch and converted it to a SED command in the Makefile.
Added new shadow utilities.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
(cherry picked from commit 87e5ded04c)
Busybox in default uses SHA512 as well.
On big ditribution this default is sourced from PAM. That means that
shadow reads pam settings and uses that. OpenWrt in most cases does not
have PAM installed and in such case shadow fallbacks to its own default
which is DES. This just changes that default to SHA512 which is
consistent with rest of the system.
Signed-off-by: Karel Kočí <karel.koci@nic.cz>
(cherry picked from commit f27ce05a58)
Removed findutils-xargs dependency due to added busybox support in version 2.8
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
(cherry picked from commit 2c22dcd3dc)
Update collectd to 5.10.0
* leave new plugins as disabled for now (procevent, sysevent)
* refresh patches. Remove unenecessary version fix
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
(cherry-picked for 19.07. PKG_RELEASE=2 as cpufreq was already backported)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Adjust the reaction to a polling interval timestamp that references
to a past time.
Past timestamps can happen when ntpd adjusts router's time after network
connectivity is obtained after boot. Collectd shows warnings for each plugin
as it tries to enter new values with the same timestamp as the previous one.
This patch adjusts the next polling time to be now+2 seconds for the main
loop and for the plugin-specific read loops. That avoids the warnings, but
does not overreact in case there are shorter polling intervals or the time
gets adjusted for other reasons.
Additionally some debug statements are aded, but they are visible only
when --enable-debug configure option is used in Makefile.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
(cherry-picked for 19.07)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Collectd without log type plugin loaded will write log lines to stderr.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
(cherry-picked for 19.07)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
The only action the Threshold plugin takes itself is to generate and
dispatch a notification. Other plugins can register to receive
notifications and perform appropriate further actions.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
(cherry-picked for 19.07, line numbers adjusted)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Redmine-patch-id: 3680
If I build an image with the imagebuilder I get the following output
during image building:
../root-x86/etc/init.d/collectd: line 4: /usr/share/libubox/jshn.sh:
No such file or directory
To remove this messsage move include to the needed postion, so that the
message does not occur during image building on the host system anymore.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
(cherry-picked, modified to match 19.07)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
As some ipq40xx CPUs support frequency scaling, enable building
collectd-mod-cpufreq for ipq40xx (for private builds) and
its package architecture brcm2708_bcm2709 (for buildbot)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
(cherry picked from commit 5e0d5c9c7f)
Drop the config knob 'listen_address' and introduce 'listen_interface'
and 'listen_ipv6' instead.
'listen_interface' takes an openwrt interface name ('loopback', 'lan',
'wan' etc, or "*" for all), from which the primary IP is used to listen
on. If 'listen_ipv6' is set to '1', the IPv6 adress will be used, IPv4
elsewise.
procd interface triggers are now combined with this, so if the listen
interface is not yet configured when the init script is executed, the
process start is defered, and the trigger takes care of that once
the interface is ready.
Fixes#7670
Signed-off-by: Andre Heider <a.heider@gmail.com>
(cherry picked from commit 48568ad9f9)
Karel Kočí