Without this, the host build picks up the site config in
/usr/share/boost-build/site-config.jam which causes a build failure on
Gentoo where a custom optimization value "none" is used.
Fixes#9152.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
This reverts commit 6d6c15e1e9.
The package no longer cross-compiles when building for the x86/64 target
on an x86/64, resulting in the following error:
Package unixodbc is missing dependencies for the following libraries:
libc.so.6
libpthread.so.0
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
When libnl is enabled and libnl-genl is disabled, libnl-genl-3.so.200 is
installed by InstallDev, and keepalived picks it up anyway.
This causes build to fail with the following error:
Package keepalived is missing dependencies for the following libraries:
libnl-genl-3.so.200
Instead of having a conditional dependency it is better to have a
consistent build. Disable libnl to enforce this.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
When libnl is built, libpfring links against it. This causes the build
to fail due to a missing dependency. Disable libnl to avoid this.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Since version 2.9.2, libxml2 provides its own cmake module. Install it
to avoid packages built with cmake and requiring libxml2 to fall back to
cmake's FindLibXml2 module, which seems to detect host libxml2 instead
of the one in staging_dir.
Fixes#4917.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
It seems that UCI can't handle duplicate section names in a single
config file, even if they use different types. After the previous
commit, running `uci export` results in the following error:
uci: Parse error (section of different type overwrites prior section with same name) at line 17, byte 23
Append a 6 to the com2sec6 section names to solve this.
Fixes: 0e1c8b4ccc ("net-snmp: snmpd: listen on IPv6 by default")
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
When cross-compiling Domoticz on a system without GPIO, the WITH_GPIO
flag is not set by cmake, and GPIO support is disabled as a result.
Enabling GPIO support by adding the flag to TARGET_CXXFLAGS.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Domoticz 3.8153 introduced support for dzVents. Unfortunately this was
broken by the 902_add-scripts-path, which attempts to make Domoticz more
FHS-compliant instead of throwing everything under /opt/domoticz.
The problem is that dzVents scripts added via the webinterface will be
generated on the filesystem. With the 902_add-scripts-path patch,
Domoticz tried to write this to "scriptsdir/dzVents/generated_scripts".
As the scriptsdir contains scripts that come with upstream, and are not
meant to be changed, this defaults to /usr/share/domoticz/scripts, which
is not writeable, so Domoticz is unable to write the script to the
filesystem. What is worse is that this silently fails.
Fix this by moving the generated_scripts dir to
"userdatadir/generated_scripts". The userdatadir defaults to
/var/lib/domoticz, which is writeable.
Additionally, since this patch does more than just adding the scripts
path, rename it to something more appropriate.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
When building on hosts with lmdb installed, bind configure phase fails:
configure: error: found lmdb include but not library.
Solve this by disabling lmdb. Fixes#4748.
Fixes: eab56b6bee ("bind: version update to 9.11.2")
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
When the strongswan service is running, `ipsec status` returns 0. Check
the return value instead of checking its output.
While at it, remove the [[ ]] bashism, use rereadall instead of
(reread)secrets, and move it inside the if statement.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
In commit 36e073d820, some checks were
added to see if the UCI config file exists and if there are any peers
configured in it. Due to these checks, if /etc/config/ipsec exists, but
contains no enabled peers, strongswan will not be started. This is not
ideal, as a user might want to experiment with the UCI config while
keeping existing connections in /etc/ipsec.conf operational.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Since the strongswan-utils package now only contains the aging ipsec
utility, rename it to strongswan-ipsec.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
We currently include the SCEP client in strongswan-utils, which is a
dependency of the strongswan-default meta-package. As it's generally not
recommended to generate keys on embedded devices due to lack of entropy,
move the SCEP client to a separate package, and only depend on it in the
strongswan-full meta-package.
While at it, add scepclient.conf to the package.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
We currently include the PKI tool in strongswan-utils, which is a
dependency of the strongswan-default meta-package. As it's generally not
recommended to generate keys on embedded devices due to lack of entropy,
move the PKI tool to a separate package, and only depend on it in the
strongswan-full meta-package.
While at it, add pki.conf to the package.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
For consistency, use full name instead of $(PKG_NAME) in define and eval
lines for all packages.
I've seen reviews that asked to do this before, and I am asking the same
during reviews now. To avoid this in the future, fix this treewide so
when people use existing packages as example, we will not have to
request this change anymore.
This makes all packages consistent with both LEDE and OpenWrt base
repositories.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
According to the snmpd.conf man page, the engineID of an snmp agent
should be consistent through time. However, it seems that the engineID
changes every reboot. Add options to configure how the engineID is
generated. The default setting generates it based on the MAC address of
the eth0 interface.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
We believe snmpd-static isn't useful, but download stats show it's still
being downloaded. Instead of dropping it, make it a dummy package that
depends on snmpd.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: Jo-Philipp Wich <jo@mein.io>
Commit e73964fa8f incorrectly dropped the
patch 101-update-struct-msghdr.patch. Add it again, and while add it
also add the follow-up patch that was added upstream.
Fixes#3757.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
When libnl-core is enabled, but libnl isn't, build fails because of a
missing dependency on libnl-3.so.200. Depending on libnl-core seems to
work for both cases.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
If libjson-c is detected during bind-libs configure phase, bind-libs
will be built with libjson support. This results in a missing dependency
error during install phase. Solve this by disabling libjson support.
The default busybox config used by OpenWrt does not enable floating
point number support for the sleep applet. This can cause an error when
stopping or restarting strongswan:
sleep: invalid number '0.1'
Replace the float with an integer to fix this.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
